English and Spanish COVID-19 Classes Available Now!

Change your language

Fall Protection Hazard Awareness Certificate Training : This 4 hour class covers the recognition of fall hazards and the methods of fall prevention including the use and operation of guardrail systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring, and controlled access zones. Also covered is the use of ladders and scaffold fall protection requirements.

Workers need to be trained in a language they understand. The LWSC certificate classes help create a more professional workforce. 

OSHA Training Requirements - Subpart M Fall Protection

1926.503 Training requirements The following training provisions supplement and clarify the requirements of 1926.21 regarding the hazards addressed in subpart M of this part.

(a) Training Program.

(1) The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.

(2) The employer shall assure that each employee has been trained, as necessary, by a competent person qualified in the following areas: (i) The nature of fall hazards in the work area; (ii) The correct procedures for erecting, maintaining, disassembling, and inspecting the fall protection systems to be used; (iii) The use and operation of guardrail systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used; (iv) The role of each employee in the safety monitoring system when this system is used; (v) The limitations on the use of mechanical equipment during the performance of roofing work on low-sloped roofs; (vi) The correct procedures for the handling and storage of equipment and materials and the erection of overhead protection; and (vii) The role of employees in fall protection plans; (viii)The standards contained in this subpart.

(b) Certification of training

(1) The employer shall verify compliance with paragraph (a) of this section by preparing a written certification record. The written certification record shall contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. If the employer relies on training conducted by another employer or completed prior to the effective date of this section, the certification record shall indicate the date the employer determined the prior training was adequate rather than the date of actual training.

(2) The latest training certification shall be maintained.

(c) Retraining. When the employer has reason to believe that any affected employee who has already been trained does not have the understanding and skill required by paragraph (a) of this section, the employer shall retrain each such employee. Circumstances where retraining is required include, but are not limited to, situations where:

(1) Changes in the workplace render previous training obsolete; or

(2) Changes in the types of fall protection systems or equipment to be used render previous training obsolete; or

(3) Inadequacies in an affected employee’s knowledge or use of fall protection systems or equipment indicate that the employee has not retained the requisite understanding or skill. 

This Fall Protection Certificate Class is recommended for all construction workers, and as a refresher for the competent person. 

Ladder Safety
Guard Rails
Safety Nets
Personal Fall Arrest System (Harness)
Scaffolds

Student Workbook and Class Materials
Picture ID Certificate Card, or
Wall Class Certificate
Letter of Class Completion for Company Records